Product details
You can place the microphone exactly where you like to sit comfortably, even during long gaming matches or recordings since the arm can be rotated 360°.
The arm's sturdy dual suspension springs keep your microphone firmly in place in all positions, preventing it from shaking while making your recording better.
If the microphone is heavy, you can adjust the knobs on both sides of the arm to get exactly the angle you want.
The arm is simple to clamp to your gaming table or other horizontal surfaces with a thickness of max. 6 cm.
The practical cable holder means that you avoid a cluttered table with tangled cables, which frees up space.
You can also fix the microphone arm to the wall if you like.
Suitable for most standard microphones with a 5/8", 3/8" or 1/4" thread size.
Easy to angle and rotate as needed, and just as simple to fold up and bring on trips.
Goes well with other accessories in the LÅNESPELARE series.
- Arm:
- Steel, Epoxy/polyester powder coating
- Table clamp/ Bushing/ Grip:
- ABS plastic
Measurements
Microphone armArticle Number905.713.97Width: 4 ½ "
Height: 2 ¼ "
Length: 17 ½ "
Weight: 1 lb 5 oz
Package(s): 1
Reviews
Cannot support a heavy microphonePeterI got this for a condenser microphone, must be approx. 10 oz. The arm could not support the weight and slowly collapsed.1
Decent, but not without problemsAndrewI was at the store and saw this, figured I would try it out. I currently had a cheap mic arm that was a little creaky, and this seemed to be a bit quieter.
The clamp mount is... okay. The part against the desk is a rounded piece of metal- there's no bigger, flatter element to help hold it in place. In addition, the mic then sits in a tall plastic container. If you mount this to the front of your desk, the clamp mount is very susceptible to leaning- so I'm using my previous arm's mount.
My other biggest issue with this is where the mic screws on. I use a webcam, and so I tend to have my arms come up under my face, and mount my mic vertically so it comes up right at my mouth. There's a small metal bit here that prevents you from tilting the mic inwards towards the arm, meaning on video, it can appear crooked.
Overall a decent arm, supports the weight of my Wave 3 fine, but there's a couple of glaring oversights.
Ikea is a 30-40 minute drive, otherwise I'd consider returning it.3
Good budget Mic armJensFor future custiomer notice: threading does not immediately fit into your mic you WILL need a shockmount, because it doesn't come with one. connecting an arm to a mic without shock can damage your mic! That being said, even wi th the plastic cord clips, this is nice for the budget. I want to not I got mine in the as-is section so it did NOT come with a desk clip, but again compared to some low quality ones I've bought online, Ikea delivers again. Tack tack!5
